Category: Bathroom & Kitchen

Feeding Washing Machine Drain Hose Into Kitchen Sink Plumbing

Not everyone has the luxury to have a washing room where they can install their washing machines in. Or, a large enough bathroom for the washing machine as well. 

You can only use the kitchen for doing your washing and to install the washing machine drain hose into the kitchen sink. Because plumbing isn’t the best thing that you can do, this might be a real struggle for you to install your washing machine into your kitchen sink. With this info, you will get everything you need to install the drain hose into the kitchen sink successfully, and even get some other great washing machine installation information.

Benefits of having your washing machine in your kitchen

First of all. You might wonder why people would want to have their washing machine installed in their kitchen and not in the bathroom or basement. There are many reasons why people prefer the kitchen for the washing machine installation instead of the basement or bathroom.

The bathroom might be too small for the installation, or there is only one bathroom. This can cause problems when you want to do the laundry and someone else wants to use the bathroom. This leads to people fighting and causes the washing to never get done.  There might be no basement in the house. Yes, there are some homes where there isn’t a basement. Meaning that there isn’t any extra room for doing the laundry. The kitchen is their only available space.

The other reason is that so many people are in the kitchen most part of the day. Meaning that it is just easier to have everything they need close by. And, this means the washing machine as well. Then, you will be able to do the laundry while you are cooking or assisting the children with their homework at the kitchen table. 

Tips for setting up your washing machine 

Before you can feed the drain hose into the kitchen sink, there are a couple of installation tips that you should consider.

You should make sure that you find a place for the washing machine. It should be close to the kitchen sink, but still out of your way. This is essential if you want to make the connections permanent so that you don’t need to connect the connections every time that you want to do the laundry. 

Permanent connection or temporarily connections 

Now, you should decide if you want to get permanent connections that will be permanently fixed to your kitchen sink. Or, if you want to have temporarily connections that need to be set up when you need to use the washing machine and needs to be removed and stored when you are done.

There are benefits to both options. The best thing that you can do, is to decide what options are best for your washing. To get your washing done on a regular basis without worrying about installing the drain hose. You should also consider the size of the kitchen and the area around the sink area. Leaving enough room to move around the sink without any worries.

Feeding the drain hose into the underneath the sink

Here is the guide on how you can feed the drain hose into the kitchen sink. To make sure that you are doing it correctly so that there isn’t a water mess in the kitchen that you need to clean up as well before you can start doing the laundry. 

  • Under the sink, you should remove the connectors and add a double connector instead.
  • It is important to make sure that the washing machine drain hose fit perfectly into the outlet of the drain that you just changed.
  • You can fasten the drain hose to the drain connector if you are afraid of a watery mess when the drain hose getting loses from the drain. Make sure that the water from the sink doesn’t get out of the washing machine’s outlet. 


If you need to install your washing machine in your kitchen, then this isn’t a problem. With a couple of changes, it will be possible to connect your drain hose permanently to the kitchen sink drain. With this method, you won’t have any problems with fitting pipes into a drain before you can start doing the laundry. And, don’t have to store everything away after you are done with the laundry. Making things so much easier on laundry day.

With this complete guide about Feeding washing machine drain hose into kitchen sink plumbing, you will get to learn everything about installing your washing machine in the kitchen. Making life a lot easier for yourself. Not everyone likes having their washing machine in the kitchen, but if you don’t have another choice, this is how you can connect your drain hose to the drain, to get the water drained successfully without a mess. 

How To Screed A Bathroom Floor

Cement floors in homes are getting more and more popular. This is because it is economical, and can be painted any color. Especially if you screed the cement floor. 

There are a couple of things that you need to know about screeding a bathroom floor and how to do it correctly. With the right information, you can even screed a bathroom floor yourself. You just need to know what you need to have and a guide on how to do it correctly.

What is screeding a floor all about?

If you never heard about screeding a floor before, then you might not know what we are talking about. Screeding a floor is basically when you are laying a layer of cement on the floor. But, this isn’t normal cement, and you don’t install it normally.

Screening a floor is Ordinary Portland Cement that is mixed with graded aggregates and floor base to give a unique flooring look. It is basically a modern way of laying cement as a floor in your home. 

Why is everyone consider to screed a bathroom floor or any other floor in your home?

You will notice that every one that is building a new home, is screeding their bathroom floor, or any other floor in their homes. But did you ever wonder why? This is because of many different reasons. 

This is the latest and modern way to create great-looking floors. It is easy to maintain and great to create. Even when it comes to renovating your home, it is an option to screed a bathroom or kitchen floor. The best part is that you can do this in any color that you prefer. This is also something that you can do yourself or you can hire someone to do it for you. 

Benefits of screeding a floor

There are many benefits of screeding a floor. Especially a bathroom or kitchen floor. First of all, the cement floor will not get damaged with any water on the floor. There are many different floors that can get water damaged and that isn’t recommended for bathrooms.

The other thing that you need to know is that this is an economical way of creating great looking and modern floors. Because you are basically just using cement to create this look, you will not spend as much money on it as with another type of floors that can become really expensive, and that is delicate and easily breakable. The cement floor that was screed is durable and long-lasting. It will not break, crack or get damaged in any way. Making this one of the most durable floors in modern homes.  

The last benefit is that you can create any color floor. Making sure that your floor is matching the rest of your home’s décor. 

How long does it take to screed a floor?

It is important to know that it doesn’t take too long to create screed floors. However, it does take a long time to dry correctly. It can take up to 7 days to have dry screed floors. And, it is important to make sure that you are treating your screed floors correctly while it is still wet. No walking on the floors is essential during this time. 

Guide in how to screed a bathroom floor

This is a guide in how to screed a bathroom floor in short.

  • Washing and cleaning the floor before you start the screed process.
  • Separate the concrete floor from the screed level by using polyethylene or PVC sheets.
  • Mix your screed mixture and making sure that you are reinforcing it to prevent it from cracking when drying.
  • Start at one corner, furthest from the door, and start the screeding process. Making sure that you are creating an even floor. 
  • Cover the floor with plastic and let it dry for seven days. Making sure that the floor is completely dry before you are walking on the floor.

Last tips to consider when screeding your bathroom floors 

If you don’t know exactly how to screed your bathroom floors, you should rather hire someone to do it for you. It is important that the screeding is done correctly in order for you to get the best results. Even, if this means that you should pay someone to do it. You should also make sure that you are using the highest quality equipment and mixture to screed your floors. This is the best way to make sure that you are getting the right results that will last.

It isn’t hard to screed the bathroom floors. But, then you need to make sure that you know exactly how to do it. And, you need to know what type of cement you need to use. You should consider hiring an experienced person to screed your floors if you want to have quality floors, that will last a long time.

How To Remove Flow Restrictor From Moen Shower Head

There comes a time when everyone has problems with their showerhead. Problems of water flow that is getting weak and restricted. This doesn’t mean that you should now start looking for a new showerhead. This only means that you might want to remove the flow restrictor from the showerhead. Especially, when you have problems with the Moen showerhead. 

These are how you can remove the flow restrictor from the Moen showerhead and reasons why you want to remove this from any showerhead. This is something that not many people know they can do.

What is the purpose of the flow restrictor?

The first thing that you might wonder is what is the purpose of the flow restrictor in the first place. Is this something that is really important, or can you remove it without any problems? This is something that you need to know before you can just take it out.

The purpose of the flow restrictor is actually just to safe water. The government is trying to let people save water, and they are required showerhead manufacturers to install flow restrictors to their showerheads. If you struggle with low water flow, you can take the restrictor out, without any problems. But you need to make sure that you know exactly how to remove it correctly. 

Why do you want to remove the flow restrictor from the Moen shower head?

The water flow isn’t equally strong everywhere. And, you want to get the most out your Moen showerhead. The showerhead isn’t going to give you the best results if you don’t have a strong water flow coming through the shower. 

The moment that you are removing the flow restrictor from the Moen shower head, you are going to get a showerhead that is going to have stronger and faster water flow. Making your shower experience even better. You will not have any restrictions with your water flow again after you have taken out the flow restrictor correctly.

Steps in how you can remove the restrictor from any showerhead

You will be surprised at how easy it really is to remove the flow restrictor from the Moen showerhead. You just need to know how the restrictor looks like and how to remove it without damaging the other things around it.

The first thing that you need to do, is to remove the showerhead from the shower. If you have installed the Moen shower head in the shower, you will know how to remove it safely. Just be careful that you don’t damage the pipes around the showerhead. 

Then, you should take a small screwdriver and take out the rubber band with the flow restrictor in the shower head out. This isn’t difficult and it isn’t fastened with anything. Just be careful that you don’t damage the showerhead in the process. You will clearly see the flow restrictor because this is a small part inside the shower head that is making the water flow less. The moment that you have taken the flow restrictor out, you will see that there aren’t any obstructions between the pipe and the showerhead anymore. 

The only thing that is left to do, is to install the showerhead back in the shower again. Making sure that the head is fastened correctly and be sure that you don’t damage anything on the shower or showerhead. 

Tips to remember when it comes to flow restrictors and removing it from the shower heads

There are a couple of things that you need to remember when it comes to the flow restrictors and removing them from the Moen showerhead. 

First of all, just because you have removed the restrictor, it doesn’t mean that the water flow will now be automatically stronger. If your overall water flow is slow, then taking out the restrictor won’t really make a difference. But, it is worth the try.

You don’t have to worry that you will damage your shower head in any way if you are taking out the flow restrictor from the showerhead. As said before, the only purpose is to restrict the amount of water that is flowing from the pipes to the showerhead. Trying to save water. If you have a water shortage, it isn’t recommended that you should remove the flow restrictor from the showerhead until the water shortage is over.

You can easily remove the Moen flow restrictor if you have slow water flow in your home. This will make the water flow a bit stronger and give you a better shower experience. But, this will only work if you have great general water flow in the home. With this guide, you will know how to remove the restrictor and you will know how to do it without damaging your Moen showerhead. 

How Much Does A Cast Iron Bathtub Weigh?

There is nothing as beautiful as a cast iron bathtub in a newly renovated bathroom. However, there are more benefits in having a cast iron bathtub than just the beauty of it. The one thing that you should know is this type of bathtub is really heavy. And, it can be too heavy for just any bathroom floor. Its why you should make about what the cast iron tub weighs. In order for you to know if your floor is strong and durable enough for this type of bathtub. This is everything that you need to know about how much a cast iron bathtub weighs and some other, essential information about these bathtubs.

Benefits of installing a cast iron bathtub in your bathroom

First of all, why are there so many people that are considering installing a cast iron bathtub in their bathrooms? These bathtubs are a lot more expensive than other tubs that are basically doing the same thing.

The first benefit is durability. These tubs are staying in perfect condition for much longer. It doesn’t turn yellow as easily as other, everyday baths. It really looks great, if you are walking into a bathroom and you are seeing a cast iron bathtub. It feels like you can get into the bath and enjoy a long bath right at that moment. They are investments to any home and adding value to the home.

Why should you know exactly what a cast iron bathtub weigh?

It is essential to know exactly what a cast iron bathtub weight. This is because these baths are really heavy and can damage any floor. You should normally need to strengthen the floor of a bathroom that has a cast iron bath in. And, if the bathroom is on the second floor, it is even more important to know.

Some cast iron bathtubs are a lot heavier than other cast iron baths, and, this is something to consider if you have a delicate floor, or as said before, if the bathroom is on the second floor. The contractor is normally doing the calculations to ensure that even with a bathtub full of water, the floor will be strong enough to hold the bathtub without any problems.

Different size cast iron tubs weigh differently                                                                        

Something else to know is that different type and different size cast iron bathtubs has different weights. And, it is important to know exactly the weight of the tub that you are going to purchase. Even, if you are hiring a contractor to upgrade your bathroom.

He needs to know the weight of the tub in order to strengthen the floor correctly. Just to say to him that you have ordered a cast iron tub, won’t be enough information. He needs to know the exact type of bath that you have purchased and the total weight before and after water.

Samples if different tubs with their weighs

Here is some sample of how different cast iron bathtubs can weigh differently. And, this can assist you in finding the right tub that will be the right weight for your bathroom floor. An average bathtub can weigh between 240 and 500 pounds depending on the size and style.

  • Pegasus Claw Feet Tub weight without water is about 247pound and in total it can go up to 738 pounds with water.
  • KOHLER Seaforth Tub has weight without water of about 277 pounds and in total it can go up to 743 pounds with water.
  • Barclay Products Lion Paw Feet Tub has a weight without water of about 364 pounds and with water is can go up to 914 pounds.

Remember that the water in the bathtub is added to the weight

It is really important to calculate the weight of the water in the bathtub as well when you want to find out if the floor is going to be strong enough for the floor. You might say that the water isn’t staying long enough in the bathtub to cause damage, but this is where most people are wrong.

With the floor not strong enough, even a small weight difference in a short period can cause damage. And a small amount of damage done over a long period of time can become a lot of damage and become seriously dangerous. Especially, when the bathroom is on the second or third floor. This is why you always should calculate the weight of the water with the tub when you are installing a cast iron bathtub.

It is important to know the weight of a cast-iron bathtub before you install it in your newly renovated bathroom. You should make sure that your floor is strong enough to hold this heavy bathtub safely. There are many benefits of having a cast iron bath, but then you should make sure that your bathroom floor is strong enough to take the weight of this heavy bathtub.

What Are Some of the Pros and Cons of Hot Water Recirculating Pumps?

During the cold periods of the year like December, taking a cold shower in the morning is close to torture to most people. As a result, close to 99 percent of homes in countries that experience winter have installed hot water shower systems. Since most hot water heaters are usually installed some distance away from the bathroom, it takes quite a few minutes for hot water to flow to your faucets.

By the time hot water reaches your fixture, gallons of water would have flown down the drain. This leads to water wastage which adds up to your expenses. To solve this problem, a hot water recirculating pump should be installed. A hot water recirculating system will help hot water reach your showers instantly. Besides cutting down the amount of time you must wait for the hot water, the recirculating pump will also ensure that you don’t waste any water.

You may ask yourself, what is a hot water recirculating pump? Well, it is a system that keeps your water hot by recirculating it. When the temperature of the water cools below a certain temperature, it is pulled back to the hot water heater to get reheated while simultaneously bringing in fresh hot water to the hot water line from the tank.

The hot water recirculating pumps can be built into the plumbing system of a house during construction. It can also be incorporated to the plumbing system of the house later on. Just like any other appliances, hot water recirculating pumps have pros and cons.



This is the biggest advantage of hot water recirculating pumps. They make hot water to be available on demand. Any time of the day, you are assured of getting hot water from your faucets. Without it, you will have to wait for several minutes for your water to get hot when you turn on your faucet. When you turn off your taps, your heater will automatically shut down. However, with a hot water recirculating pump, cool water in the pipes will be pushed back for heating so that hot water is readily available.

Minimal Water Wastage

With hot water recirculating pumps, you can get hot water instantly. This helps to avoid water wastage since you won’t have to wait for water to flow out of the faucet before it can get to the right temperature. For heavy users such as hotels, the cost savings will be substantial.

Widely Available

Another good thing about the hot water recirculating pumps is that they are widely available in stores. Installing and operating them is also easy. You can do the installation process on your own without the need for special tools.

Minimal Power Consumption

Most water recirculating pumps consume minimal power. Some modern models can even be turned on whenever hot water is required. Even better, there are some that you can even program to shut on and off after some time intervals.


When it comes to the drawbacks of hot water recirculating pumps, they are relatively few. The biggest drawback to installing one is the initial cost, which usually cost $300 upwards. Additionally, the cost of operation of older models is quite significant since they work continuously. As a result, you will incur extra electricity costs since the pump continues to draw power even when you are not using any hot water. Lastly, the water pipes have significant heat loss.